Ferm BGM1021 Manuel d'instructions télécharger pdf (Page 3)

Ferm

WET & DRY BENCH GRINDER

The numbers in the following text refer to the

drawing on page 2

For your own safety and for the safety of

others, please read these instructions

carefully before using this appliance. It

will help you understand your product

more easily and avoid unnecessary

risks. Keep this instruction manual in a

safe place for future use.

Contents:

1. Machine data

2. Safety instructions

3. Installation

4. Operation

5. Maintenance

1. Machine data

Technical specification

Voltage 230 V~

Frequency 50 Hz

Power input 250 W S2=30 min.

No load speed 2950/min

Grinding stone dimensions Ø 150x20 (12.7) mm

Wet grinding stone dimensions Ø 200x40 (20) mm

Weight 8.5 kg

Lpa (sound pressure level) 62.6 +3 dB(A)

Lwa (acoustic power) 75.6 +3 db(A)

Vibration < 2.5 m/s

Load factor

A load factor of S2 = 30 min (intermittent periodic

duty) means that you may operate the motor

continuously at its nominal power level for no

longer than the time stipulated on the

specifications label (30 minutes ON period). If you

fail to observe this time limit the motor will

overheat. During the OFF period the motor will

cool again to its starting temperature.

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given in EN

60745; it may be used to compare one tool with

another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned

• using the tool for different applications, or with

different or poorly maintainted accessories,

may significantly increase the exposure level

• the times when the tool is switched off or when

it is running but not actually doing the job, may

signifi cantly reduce the exposure level

Protect yourself against the effects of

vibration by maintaining the tool and its

accessories, keeping your hands warm, and

organizing your work patterns.

Contents of packing

1 Wet & dry bench grinder

1 Sets eye shield bracket + eye shield

1 Tool rest

1 Users manual

1 Guarantee card

Check the machine, loose parts and accessories

for transport damage.

Features

Fig. A

1. On/off switch

2. Support

3. Cover glass

4. Cover glass holder

5. Screw

6. Grinding stone wet

7. Water reservoir

2. Safety instructions

In this manual and/or on the machine the following

symbols are used:

Denotes risk of personal injury, loss of

life or damage to the tool in case of non-

observance of the instructions in this

manual.

Indicates electrical shock hazard.

Immediately unplug the plug from the

mains electricity in the case that the

cord gets damaged and during

maintenance

Keep bystanders away

1 2 3 4 5 6 7 8 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Ferm BGM1021 Manuel d'instructions Page 3

Commentaires sur ces manuels